Composite rebar TEXOLIT_LUX, арт. 420 258-1 d-7 mm, roll 50 m

Name: Composite rebar
SKU: 420 258-1
Price: 0.20 UAH
Availability: InStock

d-7 mm

0.20 € / m

for wholesale orders - contact us:

+38 (063) 363-06-34

Buy composite rebar TEXOLIT_LUX d-7 mm, roll 50 m

Reinforcement d-7 mm TEXOLIT_LUX belongs to the manufacturer’s specialized series, it is a product with quartz sand spraying.

The TEXOLIT_LUX series is manufactured in accordance with TU U 22.2-44839733

Reinforcement d-7 mm TEXOLIT_LUX can be used in construction as a universal reinforcing material for general-purpose concrete structures.

Composite rebar TEXOLIT_LUX d-7 mm roll 50 m

A series that, according to the main characteristics of diameters, mass and the presence of quartz sand spraying, is similar to composite reinforcement, massively presented on the construction market.

Recommendations for use:

– strip foundations of private cottages, outbuildings, fences and enclosures, paving of houses and cottages, small architectural forms in landscape construction, etc.

– as structural reinforcement for reinforcing concrete bases of driveways and adjacent areas of private and commercial facilities with an average load

– for reinforcing flat roofs and other structures in the form of a frame to prevent the formation of cracks

Calculate the cost-effectiveness of replacing steel reinforcing materials with composite materials using the calculator on the website

Steel

Diameter Specify the design diameter of the steel reinforcement to be replaced with composite.

mm

Quantity Specify the required exact amount of steel reinforcement (for convenience, it can be done both in tons and in meters)

Unit cost The basis for the calculation is the average retail value of steel fittings. Similarly, the calculator uses the retail value of composite reinforcement. For bulk orders, a discount is applied to both steel and composite parts, so the total amount of savings when replacing remains constant.

Total weight

kg

Total cost:

€

Composite

Diameter

0

mm

Quantity

0

m

Unit cost

0

€/m

Total weight

8

kg

Total cost:

8

Steel

Diameter Specify the design diameter and cell of the steel mesh to be replaced with composite.

mm

Quantity Specify the required exact amount of steel mesh (for convenience, this can be done both in maps of 1*2 m and in m2)

Unit cost The basis for the calculation is the average retail value of the steel mesh. Similarly, the calculator uses the retail value of the composite grid. For bulk orders, a discount is applied to both steel and composite parts, so the total amount of savings when replacing remains constant.

Total weight

kg

Total:

€

Composite

Diameter

8

mm

Quantity

8

m²

Unit cost

0

€/m²

Total weight

8

Total:

8

€

WARNING! The given recalculation is standard only for the standard use of reinforcement of the Armalit_BASE series, which meets the standards of DSTU 9065:2021. Recalculation using this calculator does not apply to the use of reinforcement in floor slab structures. The recalculation of the use of composite reinforcement in floor slabs is calculated individually for a specific project, but according to experience to date, it is not cost-effective.
COMPOSITE REINFORCEMENT AND MESH SHOULD BE USED EXACTLY WHERE IT IS NEEDED (see "MORE INFO").

More info

Technical characteristics of composite rebar and mesh

Features

Steel

Composite

Strength limit, MPa

390

1000

Modulus of elasticity, GPa

200

50

Coefficient of thermal conductivity, W/m°C

46

0.35

Density, t/m³

7.85

2

Linear coefficient of thermal expansion, mm (for concrete 0,07 mm)

0.13

0.09

Relative elongation, %

14

2.2

Corrosion resistance

low

high

Radio transparency

low

high

Electrical conductivity

electrically conductive

dielectric

More info

Leave a review